All Prosup video camera support equipment such as a camera leveller, jib arm, camera slider, camera track, laptop dolly, jib arm dolly, mounts, dolly track, gimble, 3 way leveller, U bangi slider, tripod, video crane and more.
-
Camera Leveller by Prosup Professional Camera Support: This adapter ring slides over any Prosup 100mm bowl performed product and allows a pan and tilt head to fit with a 150 mm ball base. Camera Leveller - 100 to 150mm Bowl Adapter | by Prosup Professional Camera Support -
Camera Leveller Bowl by Prosup Professional Camera Suport - High quality light weight aluminum construction with anodized finish. 100mm Leveller Bowl Camera Leveller - 100mm Leveller Bowl | by Prosup Camera Support -
100mm Half Ball camera adapter by Prosup Professional Camera Support - For extra support using a tripod. With 3/8" thread on top to screw into any sleeper of the Tango Track camera slider. Designed to facilitate quick leveling of 100mm bowl tripods. 100mm Half Ball camera adapter | by Prosup Professional Camera Support -
Camera Leveller 28mm Spigot for Tango slider system | by Prosup Professional Camera Support Levellers are camera supporting systems you have to put under your camera. Such a camera supporting system makes it possible to turn your camera from left to right, but you can also move it up and down. By doing so, you can make low shots and landscape shots. -
Do you already have a job arm, remote, tango roller, camera track, offset arm, leveller, riser or dolly? Great, but you might need some more stuff. Watch our specials and see if you need more complementary camera supporting systems such as Elemack Male (Euro Coupling), 75mm Bowl Plate, 150mm Bowl Plate, Tie Down, Mitchell Wrench or the Seat Riser Pin. 150 mm Bowl Plate | by Prosup Professional Camera Support -
Camera Leveller Bowl by Prosup Professional Camera Suport - High quality light weight aluminum construction with anodized finish. "Boss" to 150mm 10.5 inch riser. 150mm Leveller Bowl Camera Leveller - 150mm Leveller Bowl | by Prosup Camera Support -
Spigot 28mm
Camera Leveller 28mm Spigot for Tango slider system | by Prosup Professional Camera Support Fits on any 28mm lightstand. The bottom side is provided with a 16mm pin adapter hole. Note: Only this spigot can be used for the Tango System. Other spigots will cause damage to your Tango slider system. -
3-Way camera leveller by Prosup Professional Camera Support - The 3-way leveller comes with a Mitchell (fluid head) top and a Euro coupling fitting, to level your remote head or your geared head on any level or angle.- With Mitchell top
- Stainless steel standard Euro couple fitting
- Aluminium handle with stainles steel insert
- Adjustable levelling balls
- Aluminium parts are powder coated or hardened anodized
-
Do you already have a job arm, remote, tango roller, camera track, offset arm, leveller, riser or dolly? Great, but you might need some more stuff. Watch our specials and see if you need more complementary camera supporting systems such as Elemack Male (Euro Coupling), 75mm Bowl Plate, 150mm Bowl Plate, Tie Down, Mitchell Wrench or the Seat Riser Pin. 75 mm Bowl Plate | by Prosup Professional Camera Support -
The Car grip can be used on the hood as well as side mount and has several possibilities to adjust Prosup equipment as the Gimble, Offset Arms and Powergrip (with the suction cup removed) it can be directly rigged on the car grip and together with the offset arm shapes into the side mount configuration which also fits the Vinten head adapter and Gimble. Camera mount Car Grip| by Prosup Professional Camera Support -
The Prosup Gimble is the perfect partner to allow you to level your camera on car rigs, risers, Ladder pods, wooden platform and other platforms to get that perfect shot. The Gimble can be mounted on a Power Grip Suction Cup available as an optional extra. Prosup's modular systems allows their products together with other products in the range or with product from other grip manufactures ranges. The great advantage of the Gimble is that your camera will level with the subject you wish to shoot as well as the desired angle, an easy way to rig your camera on any type of car. Camera car grip mount | by Prosup Professional Camera Support -
A strong and simple solution for mounting film or video camera onto a car. The mount is at home either on the hood or the side door. The Power Grip is ideal for any car rigging. The Power Grip platform can be tilted over a path of 180 °. Camera Power Grip mount | by Prosup Professional Camera Support -
Camera Dolly Wheels from Prosup Professional Camera Support - Hard rubber studio wheels for smooth accurate camera movement for filmmaking and video production. Camera Dolly Wheels that fit Prosup's laptop dolly. -
E-jib and Camera Platform (Laptop) Dolly. For optimum use the Laptop Dolly is provided with several adaption points to adjust just every Tripod, this makes the Laptop and E-jib the ideal combination. Increase your options of Jib movements. Prosup likes creating options for its end user and its material, for this purpose, the Camera Platform Dolly has adaption points to place any type of Tripod on the platform with the supplied tripod strips it can be attached in no time. This creates a unique combination with which we try to offer a simple, stable solution for every layout or site. Camera Dolly & Camera Jib - by Prosup Professional Camera Support -
The E-jib is an ergonomic jib, adjustable both front and rear of the jibs pivot point to make the unit easy to operate. It folds ergonomically for easy transport in a minimal size. Fits on every 100mm tripod. Camera Jib arm - E-JIB by Prosup Professional Camera Support -
E-Jib Handle Bar by Prosup Professional Camera Support The handle bar for extra support behind the Camera Jib. The Handle Bar allows easy tilts for multi- dimensional shots. -
Prosup designed the LapTop Dolly specifically for small Broadcast / Video teams. The dolly is made of CNC engineered aluminium and stainless steel. The LapTop Dolly can be folded and with the following accessories, it all fits in one Pelicase. The packing concept of the LapTop Dolly is really ingenious. On three levels all necessary accessories can be stored away. Fully loaded and including the case the unit comes to over 40kg while the dolly itself weighs in with a mere 15 kg. Camera Dolly - by Prosup Professional Camera Support -
Camera Leveller - Angle Ball Joint by Prosup Professional Camera Support. To level your Tango camera track and can make an angle of max 15o degrees. Fits on any 28mm lightstand. The Angle Ball is especially designed by Prosup for the Tango Track. Angle Ball Joint Leveller | by Prosup Professional Camera Support -
Camera Riser - Lowpod | by Prosup Professional Camera Support A lightweight and compact solution for supporting tango camera tracks. The Lowpod has a 28mm lightpin fitting. The Lowpod weigh less than 2 kg and open up the construction area between 30 and 60 cm, ie below the lowest position of a double extendable 100-mm-Statives - a request of many users.Buy various video camera risers products like Euro Pipe (20cm), Extendable Riser (100mm), Mitchell Riser, Elemack Riser or lowpod at Prosup Professional Camera Support -
Camera Riser - Mitchell Riser | by Prosup Professional Camera SupportThe Mitchell Riser is available in different lengths.- Mitchel Riser 20cm - Article no 640-20
- Mitchel Riser 30cm - Article no 640-30
- Mitchel Riser 40cm - Article no 640-40
-
Camera Riser - Camera Riser - Riser Elemack (Euro Coupling) | by Prosup Professional Camera SupportThe Riser Elemack is available in different lengths.- Riser Elemack 20cm - Article no 600-20
- Riser Elemack 30cm - Article no 600-30
- Riser Elemack 40cm - Article no 600-40
-
Camera Riser Euro Pipe (20cm) | by Prosup Professional Camera Support Buy various video camera risers products like Euro Pipe (20cm), Extendable Riser (100mm), Mitchell Riser, Elemack Riser or lowpod at Prosup Professional Camera Support -
Camera Riser Extendable Riser (100mm) for laptop Dolly | by Prosup Professional Camera Support Buy various video camera risers products like Euro Pipe (20cm), Extendable Riser (100mm), Mitchell Riser, Elemack Riser or lowpod at Prosup Professional Camera Support -
Camera Slider Tango Roller by Prosup Professional Camera Support. The Tango Pelicase Kit with 100mm Bowl. The Tango Roller is a lightweight roller system for camera weighs up to 15 kg / 33 lbs. designed around a 100mm ball system. Camera Slider Tango Pelicase Kit with 100mm Bowl by Prosup Professional Camera Support -
Camera Slider Tango Roller by Prosup Professional Camera Support. The Tango Pelicase Kit with 150MM Bowl. The Tango Roller is a lightweight slider system for camera weighs up to 15 kg / 33 lbs. designed around a 100mm Tripod with adaptor to 150mm tripods or Mitchell tripods. Camera Slider Tango Pelicase Kit with 150MM Bowl by Prosup Professional Camera Support -
Camera Slider Tango Roller by Prosup Professional Camera Support. The Tango Pelicase Kit with 75mm Bowl. The Tango Roller is a lightweight roller system for camera weighs up to 15 kg / 33 lbs. designed around a 100mm ball system. Camera Slider Tango Pelicase Kit with 75mm Bowl by Prosup Professional Camera Support -
The Camera Track Dolly - Plover Dolly - is a low track camera dolly, manufactured out of high quality steel by Prosup Professional Camera Support. The maximum load is 250 kgs. It is suitable to transport a demountable Plover column and travels very smoothly. Camera Track Dolly - Plover Dolly | by Prosup Professional Camera Support -
The Camera Track slider rail. One of our latest products: 4 tracks in a bag. Four 1.5 meter pieces of high quality, light weight rails in a bag made for the Laptop Dolly or Plover Dolly. Lt track package by Prosup Professional Camera Support Camera Track Slider Rail | by Prosup Professional Camera Support -
Camera Undersling Bracket by Prosup. To be used in combination with a fluid head in an under slung position to be mounted on a Camera plate. The Under sling Bracket allows using the Tango track inverted. Hung from a 100mm Fluid Head the bracket allows control of the suspended camera. Camera Undersling Bracket | by Prosup Professional Camera Support -
CaseCart: a production cart, with enough space to store for instance a fully rigged camera-set or Drone set-up. It’s a brand new formula: a set cart made out of a flight-case. At the moment we are working on accessories. This cart was jointly developed by Prosup and Vocas -
Do you already have a jib arm, remote, tango roller, camera track, offset arm, leveller, riser or dolly? Great, but you might need some more stuff. Watch our specials and see if you need more complementary camera supporting systems such as Elemack Male (Euro Coupling), 75mm Bowl Plate, 150mm Bowl Plate, Tie Down, Mitchell Wrench or the Seat Riser Pin. Elemack Male (Euro Coupling) | by Prosup Professional Camera Support -
An offset arm is an extension of the camera and camera system. It makes it possible to move your camera quite easily. Would you like to extend your camera? Choose one of our offset arms. Great for getting in tight spaces or reaching over the top. Euro-Euro Offset 25cm Camera Offset Arm | by Prosup Professional Camera Support -
Grip track 2-4-6- or 8 feet by Prosup -Prosup Grip Track available in lenght of 2 - 4 - 6 and 8 feet. The Grip track is not a stock item, but can be produced on request. Camera Grip Track | by Prosup Professional Camera Support -
Low Mount Rig - Camera Rig by Prosup Professional Camera Support. The Low-mount rig is used on the Laptop Dolly to make super low camera shots from various angles, suitable for all sorts off camera types; 75mm, 100mm or 150 mm fluid head, fitted with a Euro coupling. Prosup is specialist in products such as a camera slider, camera track, camera crane, camera dolly, jib arms – camera jib, Q-ball, camera remote unit – dashboard, camera mount systems, camera levellers, camera risers and other camera support equipment. -
LT Bowl Camera Leveller by Prosup Professional Camera Support. 100mm Leveller bowl on a 28mm lightpin. Designed for any lightstand, to be able to transform in a cost efficient way a lightstand into a full workable 100mm tripod. Prosup is the only producer of this unique product. LT Bowl Camera Leveller | by Prosup Professional Camera Support -
The magnetic end stop for the Prosup Tango Roller - the professional camera slider system by Prosup Professional Camera Support. Makes a soft stop when travelling to the end of the track. Can also be used as protection for the end of the track with stamping option. -
Mitchell & 150mm Bowl Adapter Plate - Adapter plate to make your E-jib or Tango work on a Mitchell or 150mm tripod. Adapt your ball bottom pan head to Mitchell top plate for dollies, cranes, levelling heads, etc. Available to fit ball head for 150mm Mitchell & 150mm Bowl Adapter Plate | by Prosup Professional Camera Support -
Do you already have a jib arm, remote, tango roller, camera track, offset arm, leveller, riser or dolly? Great, but you might need some more stuff. Watch our specials and see if you need more complementary camera supporting systems such as Elemack Male (Euro Coupling), 75mm Bowl Plate, 150mm Bowl Plate, Tie Down, Mitchell Wrench or the Seat Riser Pin. Mitchell Wrench for moybos castle nut | by Prosup Professional Camera Support -
Monopod the professional Camera Slider System Tango Roller by Prosup Professional Camera Support. For the central tripod configuration, for extra support at the ends of the 1.2M track. With a 3/8" thread on top to screw into the sleeper of the Tango Track -
An offset arm is an extension of the camera and camera system. It makes it possible to move your camera quite easily. Would you like to extend your camera? Choose one of our offset arms. Great for getting in tight spaces or reaching over the top. Offset Arm 100mm Bowl 25cm Camera Offset Arm | by Prosup Professional Camera Support -
An offset arm is an extension of the camera and camera system. It makes it possible to move your camera quite easily. Would you like to extend your camera? Choose one of our offset arms. Great for getting in tight spaces or reaching over the top. Offset Arm 100mm Bowl 35cm Camera Offset Arm | by Prosup Professional Camera Support -
An offset arm is an extension of the camera and camera system. It makes it possible to move your camera quite easily. Would you like to extend your camera? Choose one of our offset arms. Great for getting in tight spaces or reaching over the top. Offset Arm 150mm Bowl 20cm Camera Offset Arm | by Prosup Professional Camera Support -
An offset arm is an extension of the camera and camera system. It makes it possible to move your camera quite easily. Would you like to extend your camera? Choose one of our offset arms. Great for getting in tight spaces or reaching over the top. Offset Arm 150mm Bowl 35cm Camera Offset Arm | by Prosup Professional Camera Support -
The 'Q-Ball' is the latest Camera Corps HD/SD Pan and Tilt camera system combining both appearance and performance in the smallest system currently available. Q-Ball Corps Remote Camera Control | by Prosup Professional Camera Support -
The Camera Track slider rail. One of our latest products: 4 tracks in a bag. Four 1.5 meter pieces of high quality, light weight rails in a bag made for the Laptop Dolly or Plover Dolly. Lt track package by Prosup Professional Camera Support Camera Track Slider Rail | by Prosup Professional Camera Support